We already have a pretty good collection of spare parts and other stuff we need to make roadside repairs. You can check out what we’ve already got below. Rover enthusiasts and veteran travelers—let us know if we’ve missed anything important!

• workshop manuals
• spare keys
• grease gun 
• brake wheel cylinder front right 243744
• brake wheel cylinder front left 243743
• brake wheel cylinder right rear 243296
• brake wheel cylinder right left 243297
• hose clamp assortment
• bailing wire
• ujoints
• tire inner tubes
• 1 Exhaust gasket
• 3 valve cover gaskets
• 3 National Hub Seals 410694
• 3 Timkin bearings RTC3416G
• 4 Timkin bearings RTC3429G
• 3 Timkin bearings RTC3426G 
• seal NAK TCW10 1.625 2.500 0.500
• seal Angus m1 112150 ¼ GACO 103
• seal Angus m1 112150 ¼ GACO 24
• seal Angus inc. 52861 GACO 5
• seal qty 2 315-236-15-0R 31
• seal m119330 ½ GACO 1
• seal Angus Ind 48895 GACO 33
• seal m1 175275 ½ 4
• 3 distance races
• 2 of the following carburetor jets .052, .051, .050, .048, .047, .046, .042, .039, .037
• 4 intake valves
• 2 hardened exhaust seats
• 2 intake guides
• 2 exhaust guides
• 4 exhaust valves
• 4 valve springs
• 4 retainers
• 8 keeper valves
• 1/4" hard fuel line with fittings 1’ length
• 1/4" PVC fuel line 4’ length
• 1/4" PVC fuel hose 4’ length
• 3/8" hose 1’ length
• 5/8" hose 9" length
• 3/4 heater hose, 1 ½’ length 

• U-shaped heater hose 509754
• 1/4" vacuum hose 3’ length
• 5 brass drain plug washers AM 515599
• upper radiator hose (new)
• heater by-pass hose waterpump hose (new)
• 4 u-bolts for front springs (one is long)
• IIA Distributor (used) original with 2 rubber o-rings
• 2 point sets RTC3270 (will these work with our distributors?)
• 1 distributor caps early IIA style for spare 566859G (will these work?)
• 2 condenser RTC3472
• 2 rotor RTC3612
• brake pipe front wheel cylinder connector
• IIA wiper motor complete ready to swap
• misc. wheel cylinder rebuild kit pieces
• 3 fuel sender gaskets
• 1 rear PTO cover plates and gear
• 2 fan belts
• frame bushings 569746
• 2 sets polyurethane bushings for front springs OME SB75
• 4 axle felt seal 
• 2 used motor mounts
• misc. brass fuel line fittings
• spare fuel selector valve lever
• 3 used hub lock washers and 2 used felt seals
• 3 brake flex hoses (1 new, 2 used)
• hub drive flange with cap (get another)
• speedy sleeve in case of front main shaft seal leak
• clear bee hive lens IIA
• 4 H4 headlight bulbs 55/100watt
• 1 H4 headlamp housing
• 1 Hella 30A automotive relay
• Nipondenzos Ugroove spark plugs